straight view of the analogue manual thermostat with dial to adjust temperature

MTC Manual Thermostat

$178.20 (Prices Include GST)

SKU: MTC-1991

General Information

The Manual Thermostat is a simple controller for Coldbuster underfloor heating systems. Designed for those who prefer straightforward operation, it allows you to manually adjust and maintain a comfortable temperature.

Features

Push-on/off button
Manual non-programmable thermostat.
Temperature control knob.
Remote Floor sensor
Locking mechanism
Can be set to limit temp (min & max)
Heat on indicator light

TECHNICAL DATA

Power supply 240V AC ±10%, 50-60 Hz
Output relay, SPST (resistive load) 16A
Built-in switch 2 pole, 16A
Ambient operating temperature 32-122°F (0-50°C)
Scale limitation- minimum and maximum
Scale range – 50-122°F (10-50°C)
On/Off differential – 0.7°F (0.4°C)
Enclosure – IP20
Dimensions (HxWxD) – 115 x 84 x 50 mm

What's Included

Installation Instructions

Floor Sensor Installation

The sensor shall be mounted in a conduit which should be sealed and placed as high as possible in the concrete, etc. The sensor wiring may be extended up to 150’ (50 m) using 18 gauge wire and the wiring resistance shall not exceed 20 ohms. Sensor wires must be kept in a separate conduit, away from all other wirings. The sensor and wires must be protected from damage during the installation. If the shielded wire is used, it must not be grounded but connected to terminal 6 on the thermostat.

Downloads

Quick Fact

Floor Heating Can Warm the Entire Room

Floor heating can serve as the main heat source for a room, efficiently warming occupied areas from the floor up.